Configuration:
Unwind
- Pneumatic brake system to control the unwinding tension precisely
- Shaftless unwinding, 3 and 6 inch paper core.
- Hydraulic loading
- Edge adjustment roller.
- LPC/EPC to control the edge or line, position of the LPC sensor can be small adjusted in handle side.
- Cutting table: Fixed splicing table.
- Operate the machine in unwinding side with rear operation panel.
- Automatic stop when the diameter of unwind reel reach to your setting.
Driving system
- Nip drive
- Driving motor: Servo motor
Cutting system
- Pneumatic cutter
- You can adjust the cutout depth by hand wheel.
- Two slitting model:Flat blade or rotary blade.
Rewinding system
- 3 inch pneumatic differential friction shafts, making the tension constant.
- Main pressing roller 4 pcs with width 350mm.
- shaft.
- Automatic stop when the length of One servo motor control the two rewinding rewinding reach your setting.
- The whole machine PLC control, you could do all the operation by touch screen which is convenient.
- Paper core aser positioning
- Static brush to eliminate static electricity.
Unloading system
Unloading holder which is convenient.
Trim system
Trim blower 1 set 1.1kw
Main Technical Parameters:
Max. width of slitting material | 1300mm |
Min. width of slitting material | 30mm |
Max. slitting speed | 400m/min. |
Max. unwind diameter | Φ 800mm |
Max. rewind diameter | Φ 600mm |
Machine power | Max. 11kw |
Overall dimension | 4200*2200*1800mm |
Net weight | 3800kg |
Machine voltage | 380/220V or customized |
Fikr-mulohazalar
Baho berilmagan.